54ACT11002, 74ACT11002 QUADRUPLE 2-INPUT POSITIVE-NOR GATES SCAS003A – D2957, JUNE 1987 – REVISED APRIL 1993•••••• Inputs Are TTL-Voltage CompatibleFlow-Through Architecture to OptimizePCB LayoutCenter-Pin VCC and GND ConfigurationsMinimize High-Speed Switching NoiseEPICt (Enhanced-Performance ImplantedCMOS) 1-mm Process500-mA Typical Latch-Up Immunityat125°CPackage Options Include PlasticSmall-Outline Packages, Ceramic ChipCarriers, and Standard Plastic andCeramic 300-mil DIPs54ACT11002...JPACKAGE74ACT11002...D OR N PACKAGE(TOP VIEW)1A1Y2YGNDGND3Y4Y4B1234 56781615141312111091B2A2BVCCVCC3A3B4AdescriptionThese devices contain four independent 2-inputNOR gates. They perform the Boolean functionsY = ASB or Y = A + B in positive logic.The 54ACT11002 is characterized for operationover the full military temperature range of –55°Cto 125°C. The 74ACT11002 is characterized foroperation from –40°C to 85°C.54ACT11002...FK PACKAGE(TOP VIEW)2BVCCNCVCC3A2A1BNC1A1Y45678321201918171615149101112133B4ANC4B4Y1A1B2A2B3A3B4A4B1161514111098≥ 121YNC – No internal connection32Ylogic diagram (positive logic)1A1B2A2B3A3B4A4B4Y3Y2Y1Y63Y74Y†This symbol is in accordance with ANSI/IEEE Std 91-1984and IEC Publication 617-12.Pin numbers shown are for the D, J, and N packages.FUNCTION TABLE(each gate)INPUTSAHXLBXHLOUTPUTYLLHEPIC is a trademark of Texas Instruments Incorporated.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Copyright © 1993, Texas Instruments IncorporatedPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•2YGNDNCGND3Ylogic symbol†2–1元器件交易网www.cecb2b.com
SCAS003A – D2957, JUNE 1987 – REVISED APRIL 199354ACT11002, 74ACT11002QUADRUPLE 2-INPUT POSITIVE-NOR GATES absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†Supply voltage range, VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 6 VInput voltage range, VI (see Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC+0.5 VOutput voltage range, VO (see Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to VCC+0.5 VInput clamp current, IIK (VI < 0 or VI > VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20 mAOutput clamp current, IOK (VO < 0 or VO > VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mAContinuous output current, IO (VO = 0 to VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mAContinuous current through VCC or GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±100 mAStorage temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.NOTE 1:The input and output voltage ratings may be exceeded if the input and output current ratings are observed.recommended operating conditions54ACT11002MINVCCVIHVILVIVOIOHIOLDt/DvTASupply voltageHigh-level input voltageLow-level input voltageInput voltageOutput voltageHigh-level output currentLow-level output currentInput transition rise or fall rateOperating free-air temperature0–55004.520.8VCCVCC–2424101250–4000MAX5.574ACT11002MIN4.520.8VCCVCC–24241085MAX5.5UNITVVVVVmAmAns/V°Celectrical characteristics over recommended operating free-air temperature range (unlessotherwise noted)PARAMETERTESTCONDITIONSTEST CONDITIONSIOH = –=50 50mAVOH=24 mA24mAIOH = –IOH = –50 mA‡IOH = –75 mA‡IOL = 50 =50mAVOLIOL = 24 mA=24mAIOL = 50 mA‡IOL = 75 mA‡IIICCDICC§CiVI = VCC or GNDVI = VCC or GND, IO = 0VCC4.5 V5.5 V4.5 V5.5 V5.5 V5.5 V4.5 V5.5 V4.5 V5.5 V5.5 V5.5 V5.5 V5.5 V55V5.5 V5 V3.5±0.14090.9±18010.10.10.360.360.10.10.50.51.651.65±1401mAmAmApFTA = 25°CMINTYPMAX4.45.43.944.9454ACT11002MIN4.45.43.74.73.853.850.10.10.440.44VMAX74ACT11002MIN4.45.43.84.8VMAXUNITOne input at 3.4 V,,Other inputs at GND or VCCVI = VCC or GND‡Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.§This is the increase in supply current for each input that is at one of the specified TTL voltage levels rather than 0 V or VCC.2–2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
54ACT11002, 74ACT11002QUADRUPLE 2-INPUT POSITIVE-NOR GATES SCAS003A – D2957, JUNE 1987 – REVISED APRIL 1993switching characteristics over recommended ranges of supply voltage and free-air temperature(unless otherwise noted) (see Figure 1)PARAMETERtPLHtPHLFROM(INPUT)AorBA or BTO(OUTPUT)YTA = 25°CMINTYPMAX1.51.56.15.39.47.854ACT11002MIN1.51.5MAX11.39.574ACT11002MIN1.51.5MAX10.68.7UNITnsoperating characteristics, VCC = 5 V, TA = 25°CPARAMETERCpd Power dissipation capacitance per gateTEST CONDITIONSCL = 50 pF, f = 1 MHzTYP29UNITpFPARAMETER MEASUREMENT INFORMATIONFrom OutputUnder TestCL = 50 pF(see Note A)500 ΩOutput50% VCCVOH50% VCCVOLInput(see Note B)tPHL3 V1.5 V1.5 V0 VtPLHLOAD CIRCUITVOLTAGE WAVEFORMSNOTES:A.CL includes probe and jig capacitance.B.Input pulses are supplied by generators having the following characteristics:PRR ≤ 10 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns.C.The outputs are measured one at a time with one input transition per measurement.Figure 1. Load Circuit and Voltage WaveformsPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•2–3元器件交易网www.cecb2b.com
SCAS003A – D2957, JUNE 1987 – REVISED APRIL 199354ACT11002, 74ACT11002QUADRUPLE 2-INPUT POSITIVE-NOR GATES 2–4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright © 1998, Texas Instruments Incorporated
因篇幅问题不能全部显示，请点此查看更多更全内容